LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Front Suspension) >> Removal & Installation >> Wheel Bearing >> Installation

Wheel Bearing: Installation

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. On Maxima, install inner snap ring into groove of knuckle. On all models, press new bearing assembly into steering knuckle. DO NOT press on inner race of bearing assembly. DO NOT apply grease to wheel bearing outer surface and steering knuckle mating surface. Install outer snap ring.
  2. Install inner and outer grease seals. Press hub into steering knuckle. DO NOT apply more than 6600 lbs. (2994 kg) of pressure. To complete installation, reverse removal procedure. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals