LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 269 (Axle Shafts - Front) >> Removal, Overhaul & Installation >> Front Axle Shaft >> Removal

Front Axle Shaft: Removal

WARNING: This page is about a different car, the 2004 Nissan Pathfinder, 2003 Nissan Pathfinder, and 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before removing nuts from torsion bar anchor bolt, ensure twisting force is eliminated from torsion bar.
  1. Raise and support vehicle.
  2. Remove wheels.
  3. Remove hub cap and snap ring from hub assembly.
  4. Remove bolts attaching axle shaft to final drive.
  5. Remove lower control arm bolts and nuts at frame.
  6. Cover axle shaft boots with shop towel to prevent damage.
  7. Lightly tap end of axle shaft with a copper hammer to separate axle shaft from steering knuckle.
  8. Remove axle shaft.
scientia non olet · About LEMON Manuals