LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Axle Shafts) >> Removal, Overhaul & Installation >> Axle Shaft >> Reassembly (Support Bearing)

Reassembly (Support Bearing)

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press bearing into bearing retainer.
  2. Install bearing retainer dust shield.
  3. Install snap ring.
  4. Press axle shaft into bearing.
  5. Install bearing retaining snap ring. See Figure .
  6. Install new dust shield.
scientia non olet · About LEMON Manuals