LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Disc Brakes) >> Adjustments >> Brake Pedal Height

Brake Pedal Height

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Check brake pedal free height "H" and depressed height "D" from floor panel to top of brake pedal pad. See Fig 1 . See BRAKE PEDAL HEIGHT  table. To adjust brake pedal height, loosen lock nut and turn brake booster input rod. Tighten lock nut to 14 ft. lbs. (18.5 N.m). Ensure rod tip stays inside input rod clevis.

Fig 1: Adjusting Brake Pedal Height
G94G46462Courtesy of NISSAN MOTOR CO., U.S.A.
BRAKE PEDAL HEIGHT

Application In. (mm)
Free Height "H" 6.15-6.55 (156.3-166.3)
Depressed Height "D" (1) More Than 3.54 (90)
(1) Under force of 110 lbs. (50 kg) with engine running.