Front Brake Pads: Installation
WARNING: This page is about a different car, the 2004 Nissan Pathfinder, 2003 Nissan Pathfinder, and 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Attach the inner shim and shim cover to the inner pad and attach the outer shim to the outer pad. Apply grease to the contact surface of pad retainer with the pads, then attach the pad retainer, pads and pad return spring to the torque member.
- Install the cylinder body to the torque member. Insert a main pin bolt (on the lower side) and tighten it to specification. See TORQUE SPECIFICATIONS . Check the brakes for drag.