Engine Pistons, Engine Piston Pins & Engine Piston Rings
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE PISTONS, ENGINE PISTON PINS & ENGINE PISTON RINGS
| Application | In. (mm) | ||
|---|---|---|---|
| Pistons | |||
| Clearance | .0004-.0012 (.010-.030) | ||
| Diameter | |||
| Grade No. 1 | 3.7590-3.7594 (95.480-95.490) | ||
| Grade No. 2 | 3.7594-3.7598 (95.490-95.500) | ||
| Grade No. 3 | 3.7598-3.7602 (95.000-95.510) | ||
| .008 In. (.20 mm) Oversize | 3.7669-3.7681 (95.680-95.710) | ||
| Pins | |||
| Diameter | |||
| Grade No. 01 | .8657-.8659 (21.989-21.995) | ||
| Grade No. 02 | .8659-.8662 (21.995-22.001) | ||
| Piston Interference Fit | .0001-.0002 (.002-.006) | ||
| Rod Bushing Clearance | |||
| Standard | .0002-.0007 (.005-.017) | ||
| Service Limit | .0012 (.030) | ||
| Rings | |||
| No. 1 | |||
| End Gap | .0091-.0130 (.23-.33) | ||
| Side Clearance | .0018-.0031 (.045-.080) | ||
| No. 2 | |||
| End Gap | .0130-.0189 (.33-.48) | ||
| Side Clearance | .0012-.0028 (.030-.070) | ||
| No. 3 (Oil Control) | |||
| End Gap | .0079-.0197 (.20-.50) | ||
| Side Clearance | .0026-.0053 (.065-.135) | ||