Procedure For Malfunction A And B
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON and wait at least 1 second.
- Shift selector lever to the D position and wait at least 3 seconds.
- Shift selector lever to the P or N position.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON and wait at least 1 second.
- Shift selector lever to the D position and wait at least 3 seconds.
- Shift selector lever to the P or N position.
- Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
- Check DTC.
- If DTC is detected, go to "DIAGNOSIS PROCEDURE ".