LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2343 (Engine Control System - DTCS P1148 To P2A03) >> DTC P1805 Brake Switch >> On Board Diagnosis Logic >> Fail-Safe Mode

Fail-Safe Mode

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When the malfunction is detected, the ECM enters fail-safe mode.

FAIL-SAFE MODE CHART

Engine operating condition in fail-safe mode
ECM controls the electric throttle control actuator by regulating the throttle opening to a small range. Therefore, acceleration will be poor.
VEHICLE AND DRIVING CONDITION

Vehicle condition Driving condition
When engine is idling Normal
When accelerating Poor acceleration