EVAP Canister Purge Volume Control Solenoid Valve

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-III

Check air passage continuity of EVAP canister purge volume control solenoid valve using "PURG VOL CONT/V" in "ACTIVE TEST" mode with CONSULT-III under the following conditions.

AIR PASSAGE CONTINUITY REFERENCE (1 OF 2)

Condition (PURG VOL CONT/V value)	Air passage continuity between A and B
100%	Yes
0%	No

Fig 1: Checking Air Passage Continuity Of EVAP Canister Purge Volume Control Solenoid Valve

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-III

Check air passage continuity of EVAP canister purge volume control solenoid valve under the following conditions.

AIR PASSAGE CONTINUITY REFERENCE (2 OF 2)

Condition	Air passage continuity between A and B
12V direct current supply between terminals 1 and 2	Yes
No supply	No

Fig 2: Checking Air Passage Continuity Of EVAP Canister Purge Volume Control Solenoid Valve

Courtesy of NISSAN MOTOR CO., U.S.A.