CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

CONSULT-III REFERENCE VALUE IN DATA MONITOR MODE

MONITOR ITEM	CONDITION	SPECIFICATION
HO2S2HTR(B1) HO2S2 HTR (B2)	Engine speed: Below 3, 600 rpm after the following conditions are met. Engine: After warming up Keeping the engine speed between 3, 500 and 4, 000 rpm for 1 minute and at idle for 1 minute under no load	ON
Engine speed: Above 3, 600 rpm	OFF

MONITOR ITEM

CONDITION

SPECIFICATION

HO2S2HTR(B1)
HO2S2 HTR (B2)

Engine speed: Below 3, 600 rpm after the following conditions are met.

Engine: After warming up
Keeping the engine speed between 3, 500 and 4, 000 rpm for 1 minute and at idle for 1 minute under no load

Engine speed: Above 3, 600 rpm

OFF