LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2280 (Door & Lock (Without Intelligent Key System)) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Special Repair Requirement

Special Repair Requirement

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. REQUIRED WORK WHEN REPLACING BCM

    The BCM must be initialized when replaced. Refer to "REMOVAL AND INSTALLATION " for BCM configuration.

    Initialize NVIS by CONSULT. For the details of initialization refer to CONSULT Operation Manual.

    Work End.