Component Function Check
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK REAR WIPER (AUTO STOP) OPERATION
WITH CONSULT DATA MONITOR
- Select "WIPER" of BCM (WIPER) data monitor item.
- Operate the rear wiper.
- Check that "RR WIPER STOP" changes to "ON" and "OFF" linked with the wiper operation.
Monitor item Condition Monitor status RR WIPER STOP Rear wiper motor Stop position ON Except stop position OFF Is the status of item normal?
YES: Rear wiper auto stop signal circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".