Component Function Check
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FRONT WIPER (AUTO STOP) SIGNAL
WITH CONSULT DATA MONITOR
- Select "WIP AUTO STOP" of IPDM E/R data monitor item.
- Operate the front wiper.
- Check that "WIP AUTO STOP" changes to "STOP P" and "ACT P" linked with the wiper operation.
Monitor item Condition Monitor status WIP AUTO STOP Front wiper motor Stop position STOP P Except stop position ACT P Is the status of item normal?
YES: Front wiper auto stop signal circuit is normal.
NO: Refer to "DIAGNOSIS PROCEDURE ".