LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2274 (Automatic Drive Positioner) >> Removal And Installation >> Automatic Drive Positioner Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When removing and installing, use shop cloths to protect parts from damage.
  1. Remove the battery negative terminal. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the instrument lower panel LH using a suitable tool. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the automatic drive positioner control unit screw (A).
  4. Separate automatic drive positioner control unit (1) from bracket and disconnect electrical connectors.
    Fig 1: Identifying Automatic Drive Positioner Control Unit And Screw
    G05713028Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals