Component Inspection

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PEDAL ADJUSTING SWITCH

Turn ignition switch OFF.
Disconnect pedal adjusting switch.

Check continuity between pedal adjusting switch terminals.

Terminal		Condition		Continuity
Pedal adjusting switch		Condition		Continuity
1	2	Pedal adjusting switch (backward)	Operate	Yes
	2	Pedal adjusting switch (backward)	Release	No
	3	Pedal adjusting switch (forward)	Operate	Yes
	3	Pedal adjusting switch (forward)	Release	No

Fig 1: Checking Continuity Between Pedal Adjusting Switch Terminals 2 And 3

Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES: Inspection End.

NO: Replace pedal adjusting switch.