Removal and Installation for Rear Expansion Valve: Installation

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

Expansion valve bolts: Refer to "COMPONENT ".

A/C refrigerant pipe to expansion valve bolt: Refer to "COMPONENT ".

CAUTION:

Do not reuse O-rings.
Apply A/C oil to the O-rings on the rear expansion valve and the rear high- and low-pressure A/C pipes for installation.
After charging refrigerant, check for leaks.