LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2265 (Interior) >> Removal And Installation >> Body Side Trim >> Removal and Installation >> Center Pillar Upper Finisher

Center Pillar Upper Finisher

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Removal

  1. Remove the center pillar lower finisher. Refer to CENTER PILLAR LOWER FINISHER  procedure in this article.
  2. Remove the bolts then assist grip.
  3. Remove the clips and bolts, then center pillar upper finisher.

Installation

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals