LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2262 (Parking Brake System) >> Removal And Installation >> Parking Brake Shoe >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Clean the brakes with a vacuum dust collector to minimize the hazard of airborne particles or other hazardous materials.
  1. Remove the rear disc rotor. Refer to "REMOVAL AND INSTALLATION OF BRAKE CALIPER AND DISC ROTOR ".
    NOTE: Remove the disc rotor only with the parking brake pedal completely disengaged.
  2. Remove the upper and lower return springs.
  3. Remove the adjuster.
  4. Remove the shoe hold-down pins, retainers, shoe hold-down springs and shoes.
  5. Disconnect the parking brake cable from the toggle lever.
  6. Remove the anchor pin if necessary.