LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2261 (Rear Final Drive (R230)) >> Removal And Installation >> Side Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive shaft from the rear final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the side flange using Tools.

    Tool numbers (A): KV40104100 (-) 

    (B): ST36230000 (J-25840-A) 

    Fig 1: Removing Side Flange Using Tools
    G04901926Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the side oil seal using suitable tool.
    CAUTION: Do not to damage gear carrier.
    Fig 2: Removing Side Oil Seal Using Tool
    G04901927Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals