LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2256 (Transfer Case (TX15B)) >> Unit Disassembly And Assembly >> Shift Control >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the snap ring.
    CAUTION: Do not reuse snap ring.
  2. Remove the retaining pin.
    CAUTION: Do not reuse the retaining pin.
  3. Remove the drum cam from the control shift rod.
    Fig 1: Identifying Snap Ring And Retainer Pin
    G04898606Courtesy of NISSAN NORTH AMERICA, INC.
  4. Remove the retaining pin from the L-H shift rod.
    CAUTION: Do not reuse the retaining pin.
  5. Remove the 2-4 shift bracket.
    Fig 2: Identifying Retaining Pin
    G04898607Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove the retaining ring from the 2-4 shift fork using suitable tool.
  7. Remove the fork guide collar and 2-4 shift fork spring from the 2-4 shift fork.
    Fig 3: Removing Retaining Ring From 2-4 Shift Fork Using Suitable Tool
    G04898608Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals