LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2256 (Transfer Case (TX15B)) >> Removal And Installation >> Transfer Control Device >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch the 4WD shift switch to 2WD and set the transfer assembly to 2WD.
  2. Disconnect the transfer control device connector.
  3. Remove the breather hose from the transfer control device.
  4. Remove the bolts and detach the transfer control device.
    Fig 1: Locating Transfer Control Device Bolts
    G04898502Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals