Component Inspection
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "OFF". (Stay for at least 5 seconds.)
- Disconnect wait detection switch harness connector.
- Remove wait detection switch. Refer to "COMPONENT PARTS LOCATION ".
- Push and release wait detection switch and check continuity between wait detection switch terminals 10 and 11.
Terminal Condition Continuity 10 - 11 Push wait detection switch Yes Release wait detection switch No - If the inspection results are abnormal replace the wait detection switch.