LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2254 (Propeller Shaft (2S1350)) >> Unit Removal And Installation >> Propeller Shaft >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the A/T shift selector to the N position and release the parking brake.
  2. Remove under cover (if equipped).
  3. Put matching marks on the rear propeller shaft flange yoke and the rear final drive companion flange as shown.
    CAUTION: For matching marks, use paint. Do not damage the rear propeller shaft flange yoke or the companion flange.
  4. Remove the bolts, then remove the propeller shaft from the rear final drive and transfer.
    Fig 1: Identifying Matching Marks On Rear Propeller Shaft Flange Yoke And Companion Flange
    G04901795Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals