LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2239 (Transfer Case (ATX14B)) >> Periodic Maintenance >> Transfer Fluid >> Replacement >> Filling

Transfer Fluid: Replacement: Filling

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the filler plug and gasket.
  2. Fill the transfer with new fluid until the fluid level reaches the specified limit near the filler plug hole.

    Fluid grade and capacity: Refer to  "FOR USA AND CANADA: FLUIDS AND LUBRICANTS " (United States and Canada), "FOR MEXICO: FLUIDS AND LUBRICANTS " (Mexico) 

    Fig 1: Checking Fluid Level From Filler Plug Hole
    G08165946Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Carefully fill fluid. (Fill up for approx. 3 minutes.)
  3. Leave the vehicle for 3 minutes, and check fluid level again.
  4. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to "DISASSEMBLY AND ASSEMBLY ".
    CAUTION: Do not reuse gasket.
scientia non olet · About LEMON Manuals