LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2239 (Transfer Case (ATX14B)) >> DTC/Circuit Diagnosis >> DTC P1823: 2-4 Solenoid >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "OFF". (Stay for at least 5 seconds.)
  2. Disconnect transfer terminal cord assembly harness connector.
  3. Check resistance between transfer terminal cord assembly terminals 4 and 5.

    4 - 5: Approx. 22.8 - 25.2 Ω 

    Fig 1: Checking Resistance Between Transfer Terminal Cord Assembly Terminals 4 And 5
    G08165869Courtesy of NISSAN NORTH AMERICA, INC.
  4. If NG, replace the 2-4WD solenoid. Refer to "COMPONENT PARTS LOCATION ".
scientia non olet · About LEMON Manuals