Removal and Installation: Installation
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal, paying attention to the following.
- If replacement of the relief valve is necessary, install the new relief valve in place by tapping it in using suitable tool.CAUTION: Do not reuse relief valve.
- Confirm that no foreign objects are adhering to the sealing surfaces of the oil cooler and oil pan (upper).
- Tighten connector bolt after aligning cutout on oil cooler with protrusion on oil pan (upper) side.
CAUTION:
Do not reuse O-ring.