Removal and Installation of Hood Lock Control: Removal
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bolts and the hood lock assembly.
- Disconnect the hood lock cable from the hood lock, and unclip it from the radiator core support upper and hoodledge.
- Remove the bolts, and the hood release handle.
- Separate the grommet from the lower dash panel. Pull the hood lock cable out through the passenger compartment.
CAUTION:
While pulling, be careful not to damage the outside of the hood lock cable.