LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2234 (Door & Lock (With Intelligent Key System)) >> Removal And Installation >> Hood >> Removal and Installation of Hood Assembly

Removal and Installation of Hood Assembly

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Supporting Hood Striker Using Suitable Tool
G04895639Courtesy of NISSAN NORTH AMERICA, INC.
  1. Support the hood striker with suitable tool to prevent it from falling.
  2. CAUTION: Operate with two workers, because of its heavy weight.

    Remove the hinge nuts from the hood to remove the hood assembly.

Installation is in the reverse order of removal.

scientia non olet · About LEMON Manuals