BACK DOOR REQUEST SWITCH: Component Inspection

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BACK DOOR REQUEST SWITCH OPERATION

Turn ignition switch OFF.
Disconnect back door request switch connector.
Check continuity between back door request switch terminals 1 and 2.

Component	Terminals		Condition	Continuity
Back door request switch	1	2	Back door request switch is pressed	Yes
Back door request switch	1	2	Back door request switch is released	No

Fig 1: Checking Continuity Between Back Door Request Switch Terminals 1 And 2

Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES: Inspection End.

NO: Replace back door request switch.