LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2233 (Front Final Drive (M205)) >> Removal And Installation >> Carrier Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain differential gear oil. Refer to "CHANGING DIFFERENTIAL GEAR OIL ".
  2. Remove the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the carrier cover bolts and separate the carrier cover from the gear carrier using Tool.

    Tool number: KV10111100 (J-37228) 

    Fig 1: Separating Carrier Cover From Gear Carrier Using Tool
    G04901835Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Do not damage the mating surface.
    • Do not insert flat-bladed screwdriver, this will damage the mating surface.