LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2233 (Front Final Drive (M205)) >> Preparation >> Preparation >> Special Service Tool

Special Service Tool

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

Tool number
(Kent-Moore No.)
Tool name		 Description
ST35271000
(-)
Drift
G04901806
 Installing drive pinion front bearing outer race.
  1. 72 mm (2.83 in) dia  .
  2. 36 mm (1.42 in) dia  .
KV10111100
(J-37228)
Seal cutter
G04874707
 Removing carrier cover
KV38100500
(J-25273)
Drift
G04876263
 Installing front oil seal.
  1. 80 mm (3.15 in) dia  .
  2. 60 mm (2.36 in) dia  .
ST30021000
(-)
Puller
G04876272
  • Removing side bearing inner race.
  • Removing drive pinion rear bearing inner race.
KV38100300
(J-25523)
Drift
G08097642
 Installing side bearing inner race.
  1. 54 mm (2.13 in) dia  .
  2. 46 mm (1.81 in) dia  .
  3. 32 mm (1.26 in) dia  .
ST30901000
(-)
Drift
G04901810
 Installing drive pinion rear bearing outer race.
  1. 79 mm (3.11 in) dia  .
  2. 45 mm (1.77 in) dia  .
  3. 35.2 mm (1.39 in) dia  .
KV40104810
(-)
Drift
G04901416
 Installing drive pinion front bearing outer race.
  1. 68 mm (2.68 in) dia  .
  2. 55 mm (2.17 in) dia  .
KV38102200
(-)
Drift
G04901430
 Installing front oil seal.
  1. 55.3 mm (2.18 in) dia  .
  2. 90 mm (3.54 in) dia  .
ST33081000
(-)
Adapter
G04876274
 Removing and installing side bearing inner race.
  1. 43 mm (1.69 in) dia  .
  2. 33.5 mm (1.32 in) dia  .
ST3127S000
(J-25765-A)
Preload gauge
  1. GG91030000 (J-25765) Torque wrench
  2. HT62940000 (-) Socket adapter (1/2")
  3. HT62900000 (-) Socket adapter (3/8")
G04876269
 Inspecting drive pinion bearing preload and total preload
-
(C-4040)
Installer
G04901816
 Installing drive pinion rear bearing inner race.
KV40105230
(-)
Drift
G04876273
 Installing drive pinion rear bearing outer race.
  1. 92 mm (3.62 in) dia  .
  2. 86 mm (3.39 in) dia  .
  3. 45 mm (1.77 in) dia  .
-
(C-4171)
Handle
G04901818
  • Removing drive pinion front bearing outer race
  • Removing drive pinion rear bearing outer race
-
(D-103)
Remover
G04901819
 Removing drive pinion front bearing outer race
-
(C-4307)
Remover
G04901819
 Removing drive pinion rear bearing outer race
(SP8P)
Slide hammer
G04901821
  • Removing front oil seal
  • Removing side oil seal
scientia non olet · About LEMON Manuals