LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2230 (Front Suspension) >> Unit Removal And Installation >> Stabilizer Bar >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front valance center.
  2. Remove engine under cover using power tool.
  3. Remove connecting rod nuts using power tool.
  4. Loosen top bolts for stabilizer bar brackets, then remove lower bolts from brackets and remove stabilizer bar.
  5. Remove bushings from stabilizer bar.
    Fig 1: Locating Stabilizer Bar Mounting Brackets Bolts
    G04899155Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals