Cruise Test - Part 3
- CHECK VEHICLE EQUIPMENT
Is vehicle equipped with manual mode shifter?
YES or NO?
YES: GO TO 2.
NO: GO TO 4.
- MANUAL MODE FUNCTION
Move to manual mode from "D" position.
Does it switch to manual mode?
YES: GO TO 3.
NO: Record the malfunction, GO TO 3.
- CHECK SHIFT-DOWN
During manual mode driving, move gear selector from M5 → M4 → M3 → M2 → M1.
With CONSULT
Read the gear position.
Is downshifting correctly performed?
YES: GO TO 6.
NO: Record the malfunction, GO TO 6.
- CHECK SHIFT-DOWN
- Confirm overdrive control switch is ON position.
- Confirm gear shift selector is in "D" position.
- Accelerate vehicle using half-throttle to D5.
- Release accelerator pedal.
- Set overdrive control switch to OFF position while driving in D5.
With CONSULT
Read the gear position.
Does A/T shift from D5 to D4 (O/D OFF)?
YES: GO TO 5.
NO: Record the malfunction, GO TO 5.
- CHECK SHIFT-DOWN
During D4 driving, move gear selector from D → 3 → 2 → 1.
With CONSULT
Read the gear position.
Is downshifting correctly performed?
YES: GO TO 6.
NO: Record the malfunction, GO TO 6.
- CHECK ENGINE BRAKE
Does engine braking effectively reduce speed in M1 position (with manual mode) or 11 position (without manual mode)?
YES >>
- Stop the vehicle.
- Carry out the self-diagnostics. Refer to "CONSULT FUNCTION (TRANSMISSION) ".
NO: Record the malfunction, then continue the trouble diagnosis.