DTC Confirmation Procedure
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If "DTC Confirmation Procedure" has been previously performed, always turn ignition switch "OFF" and wait at least 10 seconds before performing the next test.
After the repair, perform the following procedure to confirm the malfunction is eliminated.
WITH CONSULT
- Shift selector lever to "P" or "N" position.
- Turn ignition switch ON and wait for at least 2 seconds.
- Select "SELF-DIAG RESULTS" mode for "TRANSMISSION" with CONSULT.
- If DTC is detected, go to "DIAGNOSIS PROCEDURE ".