Removal and Installation: Removal
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Pry outward releasing the clips and remove the slide rail cover front LH and RH.
- Pry outward releasing the clips and remove the slide rail cover rear LH and RH.
- Remove the bolts and remove front and rear fixed crossbars (if equipped) from slide rails.
- Remove the bolts from the slide rails LH and RH.
- Shift the slide rails forward to disengage from the center stanchion and remove.
- Remove the bolts and remove the center stansions LH and RH.