Removal and Installation of Valve Oil Seal: Installation
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
- Install the valve oil seal using Tool.
Tool number: KV10115600 (J-38958)
- Apply new engine oil on the new valve oil seal joint and seal lip.
- Install the valve oil seal to the specified height "H".
Height "H" (without valve spring installed) Intake and exhaust: 14.300 - 14.900 mm (0.5630 -0.5870 in)