Intake Valve Timing Control Position Sensor (Bank 1) (LH): Installation
WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
CAUTION:
- Do not reuse O-ring.
- Replace the O-ring for the intake valve timing control position sensor with a new one.
- Lubricate O-ring with engine oil before installing.
Intake valve timing control position sensor bolt: 9.0 N.m (0.92 kg-m, 80 in-lb)