LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2222 (Engine Mechanical (VK56DE)) >> Removal And Installation >> Intake Valve Timing Control >> Camshaft Position Sensor (PHASE) >> Installation

Camshaft Position Sensor (PHASE): Installation

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION:
  • Do not reuse O-ring.
  • Replace the O-ring for the camshaft position sensor with a new one.
  • Lubricate O-ring with engine oil before installing.
CAUTION: Replace the O-ring for the camshaft position sensor with a new one, then lubricate O-ring with engine oil before installing.

Camshaft position sensor bolt: 9.0 N.m (0.92 kg-m, 80 in-lb) 

scientia non olet · About LEMON Manuals