LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2220 (Engine Mechanical (VQ40DE)) >> Removal And Installation >> Ignition Coil >> Removal and Installation >> Removal (RH)

Removal (RH)

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove intake manifold collector. Refer to "REMOVAL AND INSTALLATION ".
  2. Move aside harness, harness bracket, and hoses located above ignition coil.
  3. Disconnect the harness connector from the ignition coil.
  4. Remove the ignition coil.
    CAUTION: Do not shock ignition coil.
scientia non olet · About LEMON Manuals