LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2220 (Engine Mechanical (VQ40DE)) >> Periodic Maintenance >> Drive Belts >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2012 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air duct and resonator assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Rotate the drive belt auto-tensioner in the direction of arrow (loosening direction of tensioner) as shown, using suitable tool.
    WARNING: Avoid placing hand in a location where pinching may occur if the tool accidentally comes off.
    Fig 1: Loosening Direction Of Tensioner
    G04893979Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the drive belt.
scientia non olet · About LEMON Manuals