Service Specifications
WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Disc Diameter | |||
| Front | |||
| 1.8L | 10.11 (257) | ||
| 2.5L | 11.02 (280) | ||
| SE-R Spec-V | 12.76 (324) | ||
| Rear | |||
| 1.8L | N/A | ||
| 2.5L | 10.16 (258) | ||
| Disc Thickness (Standard) | |||
| Front | |||
| 1.8L & 2.5L | .866 (22.00) | ||
| SE-R Spec-V | 1.181 (30.00) | ||
| Rear | .354 (9.00) | ||
| Lateral Runout | |||
| 1.8L & 2.5L | .003 (.08) | ||
| SE-R Spec-V | .002 (.05) | ||
| Master Cylinder Bore Diameter | .937 (23.81) | ||
| Minimum Disc Thickness | |||
| Front | |||
| 1.8L & 2.5L | .787 (20.00) | ||
| SE-R Spec-V | 1.118 (28.40) | ||
| Rear | .315 (8.00) | ||