Sunroof Motor: Installation

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Move the sunroof motor laterally little by little so that the gear is completely engaged into the wire on the sunroof unit and the surfaces becomes parallel. Then secure the sunroof motor with the screws.
Sunroof motor screws: 2.0 - 2.6 N.m (0.20 - 0.27 kg-m, 17 - 23 in-lb)

CAUTION: Before installing the sunroof motor, be sure to place the link and wire assembly in the symmetrical and fully closed position.

Remainder of installation is in the reverse order of removal.