Removal and Installation: Removal
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Wheel hub assembly does not require maintenance. If any of the following symptoms are noted, replace the wheel hub assembly.
- A growling noise is emitted from the wheel hub assembly while driving .
- The wheel hub assembly drags or turns roughly .
- Remove the brake rotor. Refer to "REMOVAL AND INSTALLATION OF CALIPER ASSEMBLY AND DISC ROTOR ".
- Remove the rear ABS sensor, then move it away from the wheel hub assembly. Refer to
"REMOVAL AND INSTALLATION
".CAUTION:
- Failure to remove the ABS sensor may result in damage to the sensor wires and the sensor being inoperative.
- Remove the wheel hub bolts from knuckle and remove the wheel hub assembly.