Malfunction Code No. 54, DTC C1735
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CAN IGNITION SIGNAL
Using CONSULT-II, check BCM IGN RLY.
Are the Inspection results normal with the ignition switch on?
YES: GO TO 2.
NO: Check CAN system.
- BCM POWER SUPPLY
Check BCM power supply (ignition ON). Refer to BCM POWER SUPPLY AND GROUND CIRCUIT INSPECTION.
Is the power supply with the ignition switch ON normal?
YES: GO TO 3.
NO: Repair power supply as necessary "BCM ".
- DRIVE VEHICLE
Clear DTC and then test drive the vehicle and check the low tire pressure warning lamp.
Does the vehicle operate without any low tire pressure warning lamp?
YES: Inspection End.
NO: Replace BCM. Refer to "BCM ".