Front Wiper INT Operation Switch Position Cannot Be Adjusted
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- COMBINATION SWITCH TO BCM INSPECTION
Select "BCM" on CONSULT-III. With "WIPER" data monitor, check that "INT VOLUME" changes in order from 1 to 7 according to operation of the intermittent switch dial position.
OK or NG
OK: Replace BCM. Refer to "BCM ".
NG: Replace wiper switch. Refer to "WIPER AND WASHER SWITCH ".