LH Turn

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

When the turn signal switch is moved to the left position, the BCM, interpreting it as turn signal is ON, outputs turn signal from BCM terminal 60. The BCM supplies power

Through BCM terminal 60
To front combination lamp LH terminal 5
Through front combination lamp LH terminal 10
To grounds E15 and E24, and
To rear combination lamp LH terminal 3
Through rear combination lamp LH terminal 5
To grounds B7 and B19.

BCM sends signal to unified meter and A/C amp through CAN communication lines and turns on turn signal indicator lamp within combination meter.