Terminal and Reference Value for Power Window and Door Lock/Unlock Switch RH and Rear Power Window Switch LH and RH (With Front and Rear Window Anti-pinch System)
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH AND REAR POWER WINDOW SWITCH LH AND RH
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 3 | W/B | Limit switch and encoder ground | - | 0 |
| 4 | G/R | Encoder power supply | When ignition switch ON or power window timer operates | 10 |
| 8 | L | Power window motor UP signal | When power window motor is operated UP | Battery voltage |
| 9 | G | Power window motor DOWN signal | When power window motor is operated DOWN | Battery voltage |
| 10 | W/R | Battery power supply | - | Battery voltage |
| 11 | B | Ground | - | 0 |
| 12 | G/Y | Encoder pulse signal | When power window motor operates | |
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
| 15 | G/W | Limit switch signal | Power window is between fully-open and just before fully-closed position (ON) | 0 |
| Power window is between just before fully-closed position and fully-closed position (OFF) | 5 | |||
| 16 | Y | Power window serial link | When ignition switch ON or power window timer operates |