LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2108 (Brake System) >> Brake Pedal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not deform the brake tube.
  1. Remove the lower instrument panel cover on driver side. Refer to "LOWER DRIVER INSTRUMENT PANEL ".
  2. Remove the stop lamp switch from the pedal assembly.
  3. Remove ASCD switch from pedal assembly.
  4. Remove snap pin and clevis pin from the clevis of brake booster.
  5. Remove nuts and the pedal assembly. Then temporarily secure brake booster to bulkhead with hand tightened nut, so as not to damage the brake tubes.
scientia non olet · About LEMON Manuals