LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2108 (Brake System) >> Brake Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain brake fluid. Refer to "CHANGING BRAKE FLUID .
  2. Remove air cleaner and air duct. Refer to "REMOVAL AND INSTALLATION ".
  3. Disconnect harness connector for brake fluid level switch.
  4. Using a flare nut wrench, disconnect master cylinder brake tubes.
  5. Remove the master cylinder nuts.
scientia non olet · About LEMON Manuals