LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2107 (Power Steering System) >> Steering Wheel >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the front wheels in the straight-ahead position.
  2. Remove the driver air bag module. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the steering wheel center nut.
  4. Remove the steering wheel using Tool.

    Tool number: ST27180001 (J-25726-A) 

    Fig 1: Identifying Steering Wheel Tool Remover
    G04916590Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Place a piece of tape across the spiral cable so it will not be rotated out of position.
scientia non olet · About LEMON Manuals